Bayonet made for the Dutch Beaumont and Model 1871/88 Beaumont-Vitali...
Double cavity bullet mould for Norwegian and Swedish 7.5mm Nagant...
Developed for .50 calibre rifles, these felt wads are lubricated with a...
100 lubricated wads for .50 caliber black powder rifles and pistols.
Developed for .40 calibre rifles, these felt wads are lubricated with a...
100 lubricated wads for .40 calibre rifles. Lubricated with a soft black...
Felt wads for .36 calibre cap and ball revolvers and .38 black powder...
Wooden cartridge block for svartkrutt.net's pistol cartridge pouch. The...
Plastic bottle for Jeff Tanners powder dispenser. Available in two sizes.
Black powder shooting often requires equipment which isn't available off
the shelf. In this category you'll find wads, bullet lubricant, bullet moulds
and other things a black powder shooter needs.
Felt and cardboard wads are used in muzzle-loaders and black powder cartridges alike.
svartkrutt.net's card wads are environmental friendly as they are made from milk cartons or
cardboard boxes. The felt wads are made from hard density 100 per cent pure wool felt.
A good bullet lubricant is essential to achieve good accuracy with black powder guns. As well as reducing friction
and wear, a good bullet lubricant should keep the fouling soft. svartkrutt.net's selection is proven and tested
by modern black powder shooters.
Here you'll find bullet casting equipment connected to older Norwegian military rifles.
Equipment for loading black powder shotgun shells.
A limited number of supplies for the range.
.511" (13 mm) diameter milk carton wads for .50 calibre muzzle-loaders or black powder cartridges. Works well in Norwegian and Swedish 12mm Remington (12,7x44) rolling block rifles, as well as Swedish 12.17mm Model 1860 Wrede rifles.
Made for .50 calibre muzzle-loaders and black powder cartridges, for example, .50–70 Gvt. and .50–90 Sharps. They will also work in Swedish and Norwegian 12 mm Remington cartridges (12,7x44) and Swedish 12.17mm Model 1860 Wrede rifles.
Package of 100 .460" (11.7mm) milk carton wads for .45 calibre muzzle-loaders and black powder cartridges, such as .45–70 Gvt, .45–90 Sharps and .45–110. Although the diameter is a bit large they also work in .45 Colt and .45 S & W Schofield.
Easy to use ratcheting nipple wrench! Heavy duty ratchet with custom made ratchet head made with hardened steel that fits #11 nipples on rifles. Tapered fit, standard 1/4" hex, interchangeable heads. Will not fit revolvers, but revolver heads can be purchased separately.
Easy to use ratcheting nipple wrench! Heavy duty ratchet with custom made ratchet head made with hardened steel that fits #11 nipples on revolvers and pistols. Tapered fit, standard 1/4" hex, interchangeable heads. Musket and rifle heads can be purchased separately.