Plastic vials for black powder charges. The 55mm long vial holds...
svartkrutt.net's green black powder lubricant is a soft bullet lubricant...
Developed for percussion revolvers, these felt wads are lubricated with...
Skyting med gamle våpen by Øyvind Flatnes is a revised version of Vakre...
Plastic vials for black powder charges. The 75mm long vial holds...
Replica of the original safety and dry-firing device that was adopted by...
Double cavity bullet mould for 12mm Remington (12,7× 44) that casts a...
Solid metal body constructed of brass. Unlike other brands, this body is...
MTM cartridge box with 20 plastic vials for storing powder charges. The...
Replica of the original safety and dry-firing device that was used by...
Double cavity bullet mould for Norwegian and Swedish 7.5mm Nagant...
Developed for .50 calibre rifles, these felt wads are lubricated with a...
100 lubricated wads for .50 caliber black powder rifles and pistols.
Developed for .40 calibre rifles, these felt wads are lubricated with a...
100 lubricated wads for .40 calibre rifles. Lubricated with a soft black...
Felt wads for .36 calibre cap and ball revolvers and .38 black powder...
No supplier
Tags
Antique style touch hole pick. The brass pick will clean the touch hole without doing damage to the touch hole. .
Called the best rifle capper in the world. Holds approximately 75 caps. Works with any caps. Works on rifles or shotguns. WILL NOT work on revolvers, but may work on some inline action rifles.
Called the best universal capper in the world. Holds 100 caps. Works on most revolvers except some Remingtons ( one that it doesn't work on is the 1858 Remington).
Leather target sling that follows the Norwegian pattern of kammerlader and Remington rolling block military slings. The slings are similar, except that this is 16.5in (42cm) longer.
T-Handle Wrench made from the same material as the attachment heads for our Ratcheting Nipple Wrench but made into a T-Handle. Fits the huge Colt Walker and Dragoon revolvers.
T-Handle Wrench made from the same material as the attachment heads for our Ratcheting Nipple Wrench but made into a T-Handle. This is the largest that will fit rifles and shotguns.
T-Handle Wrench made from the same material as the attachment heads for our Ratcheting Nipple Wrench but made into a T-Handle. Fits regular revolvers.
Adjustable powder measure made of solid brass. The plunger is graduated in 5-grain increments with thumbscrew versatility which allows any measurement up to 120 grains.
Swivel top adjustable powder measure made for revolvers. It is graduated in 5-grain increments with thumbscrew versatility which allows any measurement up to 50 grains. Made from solid brass
svartkrutt.net's green black powder lubricant is a soft bullet lubricant developed for use in percussion revolvers, but it works fine on other types of conical black powder bullets and patches.
A straight line musket capper for winged caps. This capper is built to hold both 4- and 6- wing caps. Holds 12 caps. Made from solid brass. Works with any rifle needing musket caps. Designed with convenient side loading slot with tension spring release.
Solid metal body constructed of brass. Unlike other brands, this body is NOT made from tubing. This precision channel is fabricated with just enough space for smooth movement of #11 caps some #10 caps have problems.
SPG is an American black powder bullet lubricant which is considered the best there is. The sticks can be used in RCBS and Lyman lubrisizers, but you can also apply the lube by hand or melt it in a double boiler. SPG is a hard lubricant best suited for black powder cartridge bullets or muzzle-loading conicals, but you can also use it for patches.
SPG is an American black powder bullet lubricant which is considered the best there is. This 1/2 pound block is made for dip or pan lubing black powder cartridge and muzzle-loading conical bullets. Melt the lubricant in a double boiler. One 1/2 lbs block is equivalent to 8 sticks.
Skyting med gamle våpen by Øyvind Flatnes is a revised version of Vakre våpen – svart krutt from 2005. It covers the history of shooting, from the stone age bow to black powder cartridges. (Note that the release date is 20 March. Orders will ship from 21 March.)
Quality made of thick soft leather. Handy to have around your neck with your capper in.
Thin paper for rolling paper cartridge for percussion revolvers. The pack contains 250 sheets. Size: approx- 5 × 7 cm or 2 × 2.8in.
Blank sight for the Norwegian kammerlader. Machined in steel. The blank may require minor individual fitting with a file or Dremel. Notches are filed when the kammerlader is sighted in.
Brass sight blank. The blade measures 28,6 x 11,11 x 2 mm (7/16" high by 1-1/8" long and .080" wide.). The dovetail is 9 x 2 x 15 mm.
Adjustable powder measure made of solid brass. The plunger is graduated in 5-grain increments with thumbscrew versatility which allows any measurement up to 120 grains.
Adjustable powder measure made for revolvers and pistols. Graduated in 5-grain increments with thumbscrew versatility which allows any measurement up to 50 grains.
Plastic bottle for Jeff Tanners powder dispenser. Available in two sizes.
Simple but genious powder dispenser from Jeff Tanner which is used with an adjustable powder measure. Ideal for rapidly loading your phials. Made from strong plastic with aluminium cut off. Supplied with two powder bottles.
Replica of a pistol cartridge pouch used by the U.S. Army during the American Civil War. Originally used for cap & ball paper cartridges. If you don't use paper cartridges, the pouch is perfect for storing balls, vials or small tools. A perfect companion to the svartkrutt.net holsters and cap pouches.
Identical to the bullet lubricant that was used in Norwegian military ammunition in the mid-1800s in both the kammerlader and Remington rolling block rifles. The lubricant is made from 1 part bee's wax and three parts sheep tallow.
Gives one drop just where wanted. Absolutely tight and will not leak. Can be carried in pocket or case without soiling other articles. Constructed of solid brass, measuring 3-1/2" long.
Easy to use ratcheting nipple wrench! Heavy duty ratchet with custom made ratchet head made with hardened steel that fits musket nipples. Tapered fit, standard 1/4" hex, interchangeable heads. Will not fit revolvers and rifles, but heads for pistols, revolvers and rifles can be purchased separately.
A replica of the Norwegian carrying sling that was used on the kammerlader and Remington rolling block rifles. Will also fit other contemporary firearms. Check the sling swivels.
6.5mm (.26\") diameter champion matchlock cord. Specially imported from Japan and processed in the UK by Jeff Tanner. Supplied in 2.5 metre lengths.
Drawings on how to make a replica of a snaplock rifle with cheek stock and Bergen lock. Patterned after a Norwegian rifle from the 1500s. Note that the instructions are in Norwegian and use metric measurements.
Quality made of thick soft leather. Handy to have around your neck with your capper in.
Replica tompion or muzzle-plug for 18 bore kammerlader rifles. Made from maple and oiled The tompions were used to protect the barrel from debris and moisture. Tompions were a standard accessory with the kammerlader rifles.
Replica of the original safety and dry-firing device that was adopted by the Norwegian army for the kammerlader rifle in March 1849. Can be used as a safety during loading and as a nipple protector during dry practice – or as a decoration. A leather cord for securing the device to the sling swivel is included.
Paper cartridge forming dowel made from birch that assists you in making all types of kammerlader paper cartridge, as well as .69 calibre musket and pillar-breech rifle cartridges. Instructions (in Norwegian) and a printout of templates are included.
Save money by ordering holster, cap pouch and cartridge pouch together. The combination contains a left hand, butt forward Civil War-style cavalry holster, a cartridge pouch with Federal inspector’s markings and a U.S. Army cap pouch with wool lining. If you want a Confederate cap pouch instead, just add a comment and we’ll replace the U.S. pouch with one...
Gunflint for small to medium sized locks. Hand-knapped from English black flint. Size is approx. 5/8 x 5/8-3/4" (15,9 x 15,9–19 mm).
Gunflint for that fits most standard rifle locks. Hand-knapped from English black flint and then touched up with a grinder to better fit the jaws of the cock. Size is approx. 3/4 x 3/4-7/8" (19 x 19–22 mm).
Gunflint for muskets. Hand-knapped from English black flint. Size is approx. 1" x 1"-1 1/8" (25.4 x 25.4–28.5 mm).
From Musket to Metallic Cartridge is an historical introduction to the use of black powder firearms, from the primitive smooth-bore musket to breech-loading cartridge guns, as well as a primer on their practical use for today's black powder shooters.
Replica flint and agate arrow heads for the primitive archer.
Gunflint for pistols. Hand-knapped from English flint. Size is approx. 1/2 x 1/2-5/8 (12,7 x 12.7–15.9 mm).
Fixed powder measures made for revolvers, pistols, rifles, shotguns and muskets. Available in 30, 40, 50, 60, 75, 90 and 100 grains. Please select size.
Replica of a cap pouch used by the U.S. Army during the American Civil War.
This is a very handy little fixture! Many revolver owners need to remove nipples from their cylinders and they don't want to mare the finish putting it in a clamp. Up until now they used a piece of leather. This is very strong and can be hand held or put in a fixture as shown. It works on all sizes of cylinders.
Replica of a cap pouch used by the Confederate States Army during the American Civil War.
100 cloverlead-shaped tightly woven cotton patches. Available in two sizes: .40–49" calibre and .50–59" calibre. Thickness is .020". Produced by Lehigh Valley.
100 cloverlead-shaped tightly woven cotton patches. Available in two sizes: .40–49" calibre and .50–59" calibre. Thickness is .018". Produced by Lehigh Valley.
100 cloverlead-shaped tightly woven cotton patches. Available in two sizes: .40–49" calibre and .50–59" calibre. Thickness is .012". Produced by Lehigh Valley.
Replica of the original safety and dry-firing device that was used by the Norwegian army for the Model 1867 Remington rolling block rifles. Prevents damage to the hammer and firing pin when you dry fire the rifle. Made from thick leather.